Skip to main content

I tried to make my dryer smarter, and it (mostly) worked

When I bought my dryer two years ago, I wasn’t thinking about smart technology. I was just looking for a machine that could dry a massive amount of clothing in one load. It was only after I had my new dryer installed that I started to have some buyer’s remorse.

There are so many cool dryers on the market, like the LG Signature Smart Dryer or the Samsung Smart Wi-Fi Dryer, that can connect to your phone and tell you when your load is dry or allow you to remotely start or stop a load with Alexa or Google Assistant. That would be so helpful, but I couldn’t afford to buy another new dryer. So, you can imagine how excited I was to hear about SmartDry, a device that claims to take your dryer from dumb to smart in just minutes. I gave it a try. Here’s what I learned.

Recommended Videos

How it works

SmartDry comes with a hub that you connect to your Wi-Fi and your phone, and a sensor that has a magnet inside. You plug the hub into an outlet that is within 10 to 15 feet from the dryer, connect it, and slap the sensor inside the metal drum of your dryer where the clothing goes.

SmarDry Sensor and Hub
Alina Bradford/Digital Trends

The movement of the dryer drum activates the sensor and it starts sending messages to the hub, which then sends messages to your phone. This process can take 5 to 10 minutes. Once the sensor is sending out correct information, you can check on your clothing using Alexa or the SmartDry app.

Please enable Javascript to view this content

Smart device, dumb installation

When you open the SmartDry box, you’ll notice right away that there’s no quick start guide. All of the installation instructions are on the app. No biggie, right? Well, app installation instructions typically have animations and easy to follow steps, but this one didn’t include as many steps as it should have, leaving a lot of guesswork.

It was so bad the SmartDry instructions had both my husband (who runs a $7 million plant full of complicated tech) and myself (who has written hundreds of tech reviews) scratching our heads. After about 30 minutes or so, we worked through connecting the app to the hub and the hub to the sensor. Maybe we were just having a bad day, but that seems excessive.

Smarter, but not an honor student

Adding SmartDry to my dumb dryer did make it smarter. It sent alerts to my phone when my clothes were dry, even if the load is still running. This feature is particularly useful because you can turn off the load early to save energy. Plus you don’t over-dry your clothing, which can cause your shirts, pants, and other items to prematurely age.

SmartDry App
Image used with permission by copyright holder

By saying, “Alexa, open SmartDry,” I could get an update on how my load was going or I could also check the app. The app has some other nifty features. It can tell you exactly how hot it is inside your dryer, how wet your clothes are, how long the dryer has been on, and the exact time you started the load. You can set up alerts that will push notifications to your phone when the load is done or when the clothes are dry (or both).

What it can’t do is a little disappointing. Unlike the apps for smart dryers, the SmartDry app can’t start or stop a load for you remotely. So while adding the device to your dryer makes it smarter, it won’t be applying for MENSA membership. Though to be fair, even though it has smart in the name, I think SmartDry was meant more to be of a notification system then a full-blown transformational smart device in the way Chromecast can turn a TV into a smart TV.

How to make your dryer even smarter

Though SmartDry doesn’t have all of the features I have longed for, you can easily upgrade the situation by adding a smart plug to your dryer. The SmartDry will handle notifications, and you can use the smart plug to turn off the dryer remotely. If you’re going to go down this route, be sure to get a smart plug that is compatible with Alexa, too, like the Wemo Insight Smart Plug or the TP-Link WiFi Smart Plug. That way, you can use the assistant to control both devices with your voice.

Samsung also has a device, called the Smart Home Adapter, you can add to certain models of their washer and dryer lines. It allows you to monitor loads, adjust start and stop times, and more from your phone. If you have the right Samsung machine, this may be another option.

Alina Bradford
Alina Bradford has been a tech, lifestyle and science writer for more than 20 years. Her work is read by millions each month…
Beatbot reveals futuristic AquaSense 2 Series pool cleaners at CES 2025
Beatbot AquaSense 2

The original AquaSense Series was wildly popular when it hit the market in early 2024, and at CES 2025, Beatbot officially revealed its successor, the AquaSense 2 Series. Consisting of three robotic pool cleaners and starting at $1,500, Series 2 models are designed to automate all aspects of pool cleaning. The high-end AquaSense 2 Ultra even incorporates AI technology into the mix, promising a superior clean.

AquaSense 2 is the most affordable of the trio at $1,499, yet the three-in-one pool cleaner is still pretty well-rounded. It can clean floors, walls, and the waterline, and can run for up to four hours before needing a recharge. Toss in obstacle detection, four unique cleaning modes, and an array of 16 sensors, and it’s well-suited for most pools.

Read more
Nanoleaf reveals three smart lights, plus a spooky LED face mask at CES 2025
A person holding the Nanoleaf Light Therapy Face Mask

Nanoleaf revealed a bunch of new products at CES 2025. Along with the usual lineup of smart lights, it also debuted an LED Light Therapy Face Mask, marking the brand’s first foray into the wellness industry. Like most light therapy masks, the one from Nanoleaf looks a bit terrifying. But since it’s an advanced Food and Drug Administration (FDA) Level 2 certified skincare device, it’ll likely become a popular choice among shoppers.

The Nanoleaf LED Light Therapy Face Mask is now available for preorder and costs $150. That makes it much more affordable than other devices, which can climb over $500. Despite the low price, it’s packed with useful features. This includes clinically proven red and Near Infrared Light (NIR) treatments to reduce fine lines, acne, and uneven skin tone, as well as stimulate collagen production.

Read more
The Dreame X50 Ultra robot vacuum can hop over small obstacles with ease
Dreame X50 Ultra

Robot vacuums offer a lot of convenience — provided you only need to clean one level. If an area is separated by steps, the robot needs a bit of help getting from one elevation to another. The Dreame X50 Ultra, the newest flagship vacuum from Dreame, has a lift system that allows it to climb over small steps up to 6 centimeters (about 2.36 inches) in height. The ProLeap System is among the first of its kind, with levers that let it hop over obstacles like cords, transition strips, and much more.

The Dreame X50 Ultra also comes with the VersaLift Navigation System that lets it drop low enough to clean under furniture like beds and couches. It drops the turret — the round part on top of the robot — and uses its onboard cameras to navigate around and avoid obstacles. With a clearance of 89mm, the Dreame X50 Ultra is the limbo champion of robot vacuums. It recognizes more than 200 potential obstacles and navigates around them.

Read more