Skip to main content

Digital Trends may earn a commission when you buy through links on our site. Why trust us?

Roccat Burst Pro Air review: More than a pretty light show

burst pro black rgb on standing
Image used with permission by copyright holder
Roccat Burst Pro Air
MSRP $100.00
“The Roccat Burst Pro Air is just as fantastic to use as it is to look at.”
Pros
  • Tons of RGB
  • Good battery life given the tons of RGB
  • Phantom Flex cable is top-tier quality
  • Heat-treated PTFE feet glide effortlessly
  • Excellent optical switches
Cons
  • Lower DPI and polling rate than its competitors
  • Might be a bit heavy for some

Finding the best gaming mouse in 2022 is easier said than done — especially if you’re looking beyond the Razer and Logitech options that seem to top the charts consistently. However, Roccat has skated in to deliver one of the brightest new mice this year, the Burst Pro Air.

Recommended Videos

The new Roccat Burst Pro Air’s name may be deceiving given its weight of 81 grams, but the internals make up for it. The Burst Pro Air features a DPI of 19,000, wireless connectivity via 2.4GHz or Bluetooth, 100-hour battery life, a water- and-dust resistant shell, optical switches, a detachable Phantom Flex cable, and heat-treated PTFE feet. For $100, that’s a lot of mouse.

Design and comfort

roccat burst pro outside of the box.
Image used with permission by copyright holder

When I received the Roccat Burst Pro Air, the first thing that stood out to me was its semitranslucent design, which shines bright on the black or white version. The Pro Air features a “bionic shell” that diffuses the RGB while sealing the mouse tight enough to keep water and dust out. Having RGB on a mouse is typlically pointless since your hand covers it during use, but this isn’t necessarily the case here. 

The mouse has four RGB zones, one under the top shell, one each on the left and right buttons, and the last in between, which illuminates the scroll wheel. I hold my mouse with a palm grip, and the RGB lights under the buttons were still able to shine from underneath my fingers. It’s very neat, especially compared to some mice that hide their flashy lights under your palm, such as the Alienware Tri-Mode Wireless gaming mouse.

The RGB on the left and right mouse buttons shine from underneath my fingers.

The semitranslucent design continues underneath the mouse, allowing the RGB to shine from almost all angles. You’ll find two switches underneath the mouse: One that allows you to toggle between wired, Bluetooth or 2.4GHz wireless (assuming you’re using the included USB-A dongle). However, should you decide to use standard Bluetooth, or the included Phantom Flex cable, the dongle can be stored underneath the mouse, which is a feature that I love seeing.

While I opted to use the 2.4GHz mode, the included Phantom Flex cable is without a doubt the best USB-C cable I have ever received with any peripheral. The Phantom Flex cable is braided with Roccat’s fancy paracord, which has just enough weight and flexibility to prevent the mouse from snagging on your desk without being too heavy.

phantom flex cable on my dresser.
Image used with permission by copyright holder

Roccat could have just slapped on some standard PTFE feet like some other companies, which would’ve done the job, but it did not. Instead, Roccat included heat-treated PTFE feet that feel broken in. I did a glide test on my NovelKeys desk mat to see how the Bust Pro Air would do against my Logitech G Pro Wireless with Hyperglide skates, and the results were practically the same. So, the Burst Pro Air skates are good to go right out of the box, which says a lot about the skates on the bottom since it’s not the lightest at 81 grams.

On the left side of the mouse are the usual forward and back buttons, however, these are larger than usual. To be honest, I didn’t realize how large the side buttons were on this mouse until I took a deeper look into its design. 

Sensors and switches

owl eye sensor and ptfe feet.
Image used with permission by copyright holder

There’s a lot to the Roccat Burst Pro Air if we’re talking internals, so let’s get started. 

The switches inside of the Burst Pro Air are TTC Opticals, or as Roccat calls them, “Titan switches.” TTC is a very popular switch manufacturer for mechanical keyboards, and I didn’t even know the company made switches for mice. The process in which the Titan switches operate are like any other optical switch: A beam of light is projected from one side of the switch to the other when actuated, which results in an almost instantaneous response time.

Now, I’ve always found optical switches to be a bit of a placebo in both mice and keyboards. Plenty of people think otherwise, however. 

According to Roccat, the Titan optical switches were designed to prevent double-clicking and last up to 100 million clicks. While I haven’t clicked this mouse 100 million times (I don’t think I ever will in my lifetime), TTC is an excellent switch company — so I’ll take Roccat’s word for it.

The switches impressed me, but the sensor did not.

While the switches are optical, they still have some tactility, and the quick response time makes this mouse even more desirable. The scroll wheel feels and actuates like any other notched wheel, but it’s a bit louder than other mice that I’ve tried recently. 

The switches impressed me, but the sensor did not. The Burst Pro Air uses Roccat’s Owl-Eye sensor, with a maximum DPI of 19,000 and a polling rate of 1,000Hz.

Over the course of the last year or so, big peripheral companies like Razer, for example, have released mice with extremely high polling rates. This is evident in the Razer Viper 8KHz, which has a polling rate of 8,000Hz and a maximum DPI of 20,000. Did this bother me during use? No, however, the technology of the Owl-Eye is a bit dated, especially for this price point. 

black and white roccat burst pro air side by side.
Image used with permission by copyright holder

While the Burst Pro Air’s sensor falls short in some areas, it does work with Nvidia Reflex, a feature that reduces system latency from each mouse click in GPU-intensive games like Fortnite. However, you can only use Reflex if your monitor features G-Sync, and that’s a bit unfortunate.

The battery life on the Burst Pro Air was really impressive, especially when you factor in how much RGB this mouse has. According to Roccat, the battery life lasts 100 hours whether you decide to use standard Bluetooth or the 2.4GHz wireless dongle. As if the Phantom Flex cable wasn’t good enough, just 10 minutes of charging is all it takes to give you five more hours of gameplay.

Gaming performance

black roccat burst pro air standing up.
Image used with permission by copyright holder

One of my friends sent me a screen capture of him playing the original Doom, but with ray tracing, and because Quake RTX was so fun, this had to be as well. Doom was a solid choice when it came to testing this mouse because there’s no auto-aim, it’s very fast-paced, and I hadn’t played it in over a decade.

Nonetheless, the Burst Pro Air glided with ease, which allowed me to snap to targets easily. Since Doom is such a quick game, I needed to turn the DPI down a smidge, and the Burst Pro Air adjusted seamlessly.

Overall, the Roccat Burst Pro Air is relatively simple — it doesn’t have too many or too few buttons. If I were to pick any specific games this mouse would be fit for, it’d be something like Overwatch, due to the bright colors and amount of buttons. This is nitpicking, but it would’ve been nice to see a free-spin feature on the scroll wheel, which is starting to appear on more mice. Since I recommended this mouse for one game, I wouldn’t recommend it for something like Dota 2, since the Burst Pro Air lacks macro buttons on the side.

Our take

For $100, the Roccat Burst Pro Air falls behind its competition in areas like max DPI, weight ,and polling rates. Nevertheless, I love this mouse. The semitranslucent shell diffuses the RGB beautifully, the switches are made by a reputable company, and the Phantom Flex cable is top-tier.

Are there any alternatives?

For $100, there are more than plenty choices, especially if you’re looking for better performance. The Razer Viper 8KHz Ultralight retails for just $60 and has a maximum DPI of 20,000 and a polling rate of 8,000Hz. If you want to stick with Roccat, for $90, there’s the Kone XP, which features the same Titan switches, the Phantom Flex cable, heat-treated PTFE feet, and a scroll wheel that features left and right lateral movement.

How long will it last?

The Roccat Burst Pro Air comes with a two-year warranty and between the TTC switches, Phantom Flex cable, and water- and dust-resistant shell, I’m confident this mouse will be operable for years.

Should you buy it?

Yes, without a doubt. The Roccat Burst Pro Air performs just as well as it looks, and for $100, you cannot go wrong. I wasn’t bothered by its slower polling rate and heavier build, but mouse enthusiasts tend to be very particular, especially when it comes to sensors.

Myles Goldman
Former Digital Trends Contributor
Myles has done many things within the hobby PC building, most notably deliding an Intel i5-4690k which he and his friend…
Get ready: Google Search may bring a pure ‘AI mode’ to counter ChatGPT
AI Overviews being shown in Google Search.

It is match point Google as the tech giant prepares to introduce a new “AI Mode” for its search engine, which will allow users to transition into an atmosphere that resembles the Gemini AI chatbot interface.

According to a report from The Information, Google will add an AI Mode tab to the link options in its search results, where the “All,” “Images,” “Videos,” and “Shopping” options reside. The AI Mode would make Google search more accessible and intuitive for users, allowing them to “ask follow-up” questions pertaining to the links in the results via a chatbot text bar, the publication added.

Read more
I tested Intel’s new XeSS 2 to see if it really holds up against DLSS 3
The Intel logo on the Arc B580 graphics card.

Although it technically arrived alongside the Arc B580, Intel quickly disabled its new XeSS 2 feature shortly after it was introduced. Now, it's back via a new driver update, and with a few fixes to major crashes issues. I took XeSS 2 out for a spin with the Arc B580, which has quickly climbed up the rankings among the best graphics cards, but does XeSS 2 hold up its side of the bargain?

XeSS 2 is Intel's bid to fight back against Nvidia's wildly popular DLSS 3. The upscaling component at the core of XeSS is the same, but XeSS 2 includes both a Reflex-like latency reduction feature and, critically, frame generation. The latency reduction, called XeLL, is enabled by default with frame generation.

Read more
Windows PCs now works with the Quest 3, and I tried it out for myself
i tried windows new mixed reality link with my quest 3 alan truly sits in front of a pc and adjusts virtual screen while wear

Microsoft and Meta teamed up on a new feature that lets me use my Windows PC while wearing a Quest 3 or 3S, and it’s super easy to connect and use. I simply glance at my computer and tap a floating button to use Windows in VR on large displays only I can see.

Meta’s new Quest 3 and 3S are among the best VR headsets for standalone gaming and media consumption. When I want more performance or need to run one of the best Windows apps that aren’t yet available in VR, I can connect to a much more powerful Windows PC.
Setting up Mixed Reality Link
Scanning Microsoft's Mixed Reality Link QR code with a Meta Quest 3 Photo by Tracey Truly / Digital Trends

Read more