Skip to main content

In-display fingerprint sensors are coming to cheap phones with LCD screens

In-display fingerprint sensors will soon no longer be a feature restricted to smartphones with OLED screens. According to Lu Weibing, the general manager of the Redmi phone brand, the company’s research and development team has solved the problem of fitting these fingerprint sensors to LCD screens, indicating cheaper phones will receive this biometric security feature in the future.

Vivo fingerprint sensor review
Andy Boxall/Digital Trends

The primary problem for fitting such sensors to LCD screens was the thickness of the panel and the presence of a backlight, which stopped light from passing through the screen to the fingerprint sensor beneath. While many smartphones use OLED screens that avoid this problem, they are usually expensive upper midrange or flagship devices. Cheaper smartphones use LCD panels, and therefore usually have rear or side-mounted fingerprint sensors today.

Recommended Videos

Weibing writes in his Weibo post on the subject that Redmi, which is part of the Xiaomi family, has used a film of “infrared high transmittance” material to allow light to pass through an LCD screen and onto the fingerprint sensor. By doing so, it has the option of adding an in-display fingerprint sensor to its low-cost phones, which in turn helps it clean up the exterior design, and gives the phones a more modern, high-end look.

Please enable Javascript to view this content

While Redmi’s innovation is exciting news, it’s likely not to have worked on the project alone. In April 2019, China-based technology firm Fortsense said it had found success with an LCD in-display fingerprint sensor. Goodix Technology has also said it would be able to mass-produce an optical in-display fingerprint sensor for LCD screens in 2020. It’s possible Redmi worked with one of these two, or another company, to make the sensor.

The bigger question is, will LCD in-display sensors be any good when they arrive? We don’t know yet, but anyone who used the early optical fingerprint sensors in 2018 will remember they were not very good. They were often slow and unreliable, something a security system should not be, and may have led many to rely on less secure ways of safeguarding their phones out of frustration.

In-display fingerprint sensors soon evolved to use faster and more reliable ultrasonic systems. However, sensors embedded in LCD screens will not use this technology, and may suffer from the same problems we saw when the tech was first introduced. The industry has had time to improve the experience between then and now, and the demo video Weibing including on his Weibo post shows the sensor reacting quickly, but expectations should be kept in check until we get to try it out.

Redmi has not commented on when the first phone with its new LCD in-display fingerprint sensor will arrive.

Andy Boxall
Andy is a Senior Writer at Digital Trends, where he concentrates on mobile technology, a subject he has written about for…
Does the OnePlus 13 have a 120Hz refresh rate?
A person holding the OnePlus 13 showing the screen.

OnePlus has just launched its latest flagship, the OnePlus 13, alongside its budget sibling, the OnePlus 13R. As well as packing a Qualcomm Snapdragon 8 Elite processor and both an IP68 and IP69 rating that allows you to use the phone in the shower, it looks like we can expect great things from the OnePlus 13's 6.82-inch screen, particularly when it comes to the refresh rate.
Does the OnePlus 13 have a 120Hz refresh rate?
The OnePlus 13's screen looks set to impress, with a 2K resolution and peak brightness of 4,500 nits. It's the refresh rate we're most excited about, however. The flagship phone's display will boast a variable refresh rate of between 1Hz to 120Hz. That means the phone adjusts its refresh rate to suit the content displayed on the screen, ensuring a smoother display and saving battery life.
Does the OnePlus 13R have a 120Hz refresh rate?
The OnePlus 13R may retail for only $600, but we can confirm that the successor to the OnePlus 12R will also pack a variable 1 to 120Hz refresh rate, just like its flagship sibling and predecessor. This time around, expect a 6.78-inch AMOLED screen with 2,780 x 1,264 resolution and a peak brightness of 4,500 nits.
How higher refresh rates evolved and their benefits

Whether you're planning to pick up the OnePlus 13 or OnePlus 13R, or you have your eye on another 120Hz device, how much do you really know about the benefits of higher refresh rates and why you should shop for a device that offers them?

Read more
The Amazfit Active 2 was just announced, so the first model is on sale
A person running while wearing the Amazfit Active Smartwatch.

Investing in a smartwatch is one of the best ways to get on top of your daily, weekly, and long-term health and fitness goals. Big brands like Apple, Samsung, Google, and Garmin are the brains behind some of the top models on the market, but if you’re looking for a solid alternative, we recommend the Amazfit Active Smartwatch 35.9mm.

We also heard news at CES 2025 that we’ll be getting an Amazfit Active 2 reasonably soon, so it comes as no surprise that the O.G. model went on sale. Still, it’s one of our favorite smartwatch deals of the day, and it’s about time a company gave the Apple Watch a run for its money!

Read more
The Livall PikaBoost 2 turns any old bicycle into a powerful e-bike
Livall PikaBoost 2

E-bikes are great, but they're a lot more expensive than traditional bikes and often heavier, too. That's not to mention that they can require maintenance and suffer from technical issues. But what if you could turn your traditional bicycle into an e-bike? That's the idea behind the Livall PikaBoost, now in its second generation. It’s basically a small, motorized device that can attach to your bicycle to give it e-bike power.

I got a chance to check out the PikaBoost 2 on the show floor at CES 2025. Livall’s PR firm, WeBranding, flew me out to Las Vegas for CES 2025 to check out the PikaBoost 2, among its other brands’ devices, for myself — and I have to say, it seems to be a powerful yet inexpensive way to get the power of an e-bike without having to replace the bicycle you already have.

Read more